Loftin Equipment Co.
QuickMenu Save Document
   
 
 

Phone: (602) 272-9466          Fax: (602) 272-7582



Courage

 

 

 

 

 



Kohler Engines

KOHLER Courage®

Designed specifically for consumer applications, the Courage family of engines feature steel-forged crankshafts and advanced ignition systems, and provide greater displacement - across the board - for greater power. You'll also get dual ball bearings for easy starts, reduced noise, vibration, emissions and better fuel efficiency.

Professional Grade Features for the Consumer
Overhead valve for better fuel efficiency and cleaner emissions, cast iron cylinder bore and steel forged crankshaft provide added protection under load, extending the engine life.  

Superior Startability
The large indexable recoil starter and dual ball bearings make starting the engine nearly effortless.

Easy-to-use and Maintain
No matter the application, the dual oil fills and drains provide the user accessibility to fill and drain the oil from either side of the engine. Along with the large metal fuel tank, easy access controls and no tools required air cleaner, this engine tops the easy-to-use category.

Designed for Dependability
Low oil alert system is standard on this engine letting you know when oil is needed, along with the inline fuel filter to remove dirt and debris before fuel enters the engine. These features in turn add to the life of the engine. 

Engine Type Four-cycle, single cylinder, overhead valve, air-cooled, horizontal shaft, aluminum head and crankcase with cast iron cylinder liner.
Model SH265 SH390 SH430
Gross Power @ 3800 rpm  Max hp (kw) 6.5 (4.9) 9 (6.8) 13 (9.8)
Net Power @ 3800 rpm       Max hp (kW) 5.5. (4.1) 8 (6) 11 (8.2)
Displacement                              cu in (cc) 12 (196) 16.5 (270) 23.7 (389)
Bore                                                 in (mm) 2.7 (68) 3 (77) 3.5 (88)
Stroke                                              in (mm) 2.1 (54) 2.3 (58) 2.5 (64)
Peak Torque @ Maximum      lbs ft (Nm) 9.1 (12.4) @ 2500 13.1 (17.7) @ 2500 18.5 (25.1) @ 2500
Compression Ratio 8.5:1 8.2:1 8:1
Dry Weight (Recoil Start)              lbs (kg) 35.3 (16) 55 (25) 68.3 (31)
Oil Capacity                                U.S. qt (L) 0.63 (0.6) 1.2 (1.1) 1.2 (1.1)
Fuel Capacity                             U.S. qt (L) 3.8 (3.6) 8.3 (6) 6.9 (6.5)
Lubrication Splash
Dimensions L x W X H                 in (mm) 12.3 x 14.3 x 13.5
(313 x 363 x 342)
14 x 17.7 x 17.1
(355 x 450 x 435)
15 x 18.8 x 17.3
(380 x 478 x 439)

 

Standard Features

OHV slant cylinder EPA emissions certified Carburetor bowl drain
Cast iron cylinder liner Meets EEC and Canadian RFI standards Dual oil fills and drains
Large capacity metal fuel tank Easy access throttle, choke and fuel shut off Dipstick on starter side
Plastic fuel cap Increased displacement Automatic low oil engine shutdown system
In-neck fuel debris screen Balance shaft (11 and 13 hp) Racing-type dual-element air cleaner
Water trap in carburetor Automatic compression release High inertia flywheel
Basin shaped combustion chamber Mechanical governor Silenced air intake
Electronic ignition Sound-deadening alloy crankcase Indexable easy-pull recoil starter
Standard muffler with guard Dual ball bearings Steel forged and hardened crankshaft

Popular Factory Options

2:1 reduction Spark arrestor Low-profile air cleaner (Generator)
2:1 reduction with clutch 3- and 10-amp Low-profile muffler (Generator)
12-volt starter Crankshaft/PTO variations Remote throttle
Exhaust deflector (Keyed, Tapered, Threaded)  

website: http://www.kohlerengines.com